Medium pressure gluing system for inliner flexo foldergluer and casemaker machines

The ERO-OEM system includes the following standard features:
  • 8-channel control panel as standard (2/4 or 16 channels available on request)
  • Medium pressure double pistons ERO® glue pump
  • Medium pressure ERO® flow regulator
  • Digital proportional valve and air treatment group
  • Non-return valve and complete device equipped with alarm for low glue level in the bucket
  • Encoder complete with support and pulley,laser photo-eye, glue filter, glue air hoses, pump support and cover
  • Electromagnetic glue dispenser type GTE-13/S
  • Moving structure available as optional
  • Extra high-speed production
  • Low-maintenance & easy to use
  • Maximum reliability at high speeds
  • Cut down on glue quantity selecting the dot distribution mode
  • Top technology at a reasonable price
  • Wide range of available optional

The medium pressure gluing system has been developed for extra high-speed machines.

Maximum speed of production: over 500 m/min.
Maximum error at 500 m/min: +/- 1 mm
Dimensions: L =  400 mm, H = 1510 mm, W = 660 mm
Weight: 60 Kg without glue

Medium Pressure Glue Pump
  • Single piston ERO® Glue Pump
  • No pressure loss allowed
  • Top technology at a reasonable price
  • Low maintenance & extra high reliability
  • Driven by an electrical board
  • Easy seals replacement

All ERO® Medium-pressure systems are provided with a single-piston ERO® glue pump. This pump has been specifically designed by ERO® for the cardboard sector. It was developed to tackle the problems often inherent in other pumps. This pump is very reliable and the seals replacement is very easy and convenient.

All ERO® medium pressure systems are equipped with a MP glue pump

Glue Station
Control Panel

The 4 or 8 channel control panel is very easy to use and is equipped with  an  automatic  function  as andard. Usually installed  directly  onto e casemaker/ flexo folder-gluer machine.

As the picture shows, the con- trol  panel  is  able  to  calibrate gluing   settings   automatically according  to  the  portion/area to be glued. Measurements only  have  to  be  set  the  first time;   the   control   panel   will then calibrate the glue settings for  the  different  flap/boxes automatically.

The gluing system is tested at an air temperature of 20°C with 900 mPas glue viscosity.